Digital Incubator
Product Code : EL-IO-10984
Last updated: 6 October 2026
Quick answer: A 0.7 cubic foot PID-controlled incubator, ambient +5 to 60 degrees C, with a temperature-tracking function that records maximum deviation from set point in 0.1 degree units, a four-digit LED display and continuous self-diagnostics.
The temperature-tracking function is what distinguishes this from the simpler incubator in this family, and it is genuinely useful. It stores the maximum process temperature deviation from set point in 0.1 degree units, acting as what the listing calls a paperless chart recorder. After an overnight or weekend incubation you can see whether the temperature held, or whether there was a power loss or control fault while nobody was watching. For any work where the result depends on the incubation having been stable, that record is the difference between a result and a guess.
Control is full PID microprocessor, stated to maintain the setting even in varying ambient conditions, with a continuous self-diagnostic function that prompts if the control software malfunctions or the thermocouple fails. The four-digit LED is low-glare and readable across a room.
Construction is a high-grade aluminium interior, cold-rolled powder-coated steel exterior and a bronze acrylic see-through door. Standard equipment includes two shelves, one fixed and one adjustable, with six possible shelf positions, and a 6 foot three-prong grounded power cord. The chamber is 12 x 10 x 10 inches, 0.7 cubic feet, overall 13 x 15 x 10-3/4 inches at 26 lb.
As with the other incubators here, it heats only: the range is ambient +5 to 60 degrees C, so set points below room temperature are unavailable.
Note on the published data: the original listing gives two different control figures, stating accuracy within 1 degree C in its opening sentence and control accuracy of +/-0.5 degrees C later in the same description. Both are recorded below as published; confirm which applies with the supplier. The listing also gives the display resolution as selectable between 1.0 degrees C and 0.1 degrees F, an unusual pairing that is worth confirming.
Technical specifications
Specification | As published |
Product type | Laboratory incubator, PID digital, 0.7 cu ft |
Capacity | 0.7 cu ft |
Chamber dimensions | 12 x 10 x 10 in |
Overall dimensions | 13 x 15 x 10-3/4 in |
Temperature range | Ambient +5 to 60 degrees C |
Control | Full PID microprocessor |
Control accuracy, as published | Stated both as within 1 degree C and as +/-0.5 degrees C; confirm with supplier |
Temperature tracking | Stores maximum deviation from set point in 0.1 degree units |
Display | Low-glare four-digit LED; selectable 1.0 degrees C or 0.1 degrees F resolution as published |
Self-diagnostics | Continuous; prompts on control software malfunction or thermocouple failure |
Interior | High-grade aluminium |
Exterior | Cold-rolled, powder-coated steel |
Door | Bronze acrylic, see-through |
Shelves | Two supplied, one fixed and one adjustable; six shelf positions |
Power cord | 6 ft, three-prong grounded |
Power requirements | 115 V |
Weight | 26 lb |
Supplied from | Ambala, Haryana, India |
This listing publishes a full specification but contradicts itself on control accuracy, as noted above. Confirm the supply voltage before ordering: the published electrical specification is 115 V, which is not the Indian mains standard; ask whether a 220 to 240 V, 50 Hz version is available. Temperature uniformity across the chamber is not stated, and the unit heats only.
Range and ordering
This item belongs to the Incubators and Ovens family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.