Touchscreen Thermal Cycler
Product Code : EL-TC-11099
Last updated: 6 October 2026
Quick answer: A full-size thermal cycler with a multiformat block taking 96 x 0.2 mL tubes, 39 x 0.5 mL tubes or one 96-well plate, with a large colour touchscreen, program wizard, 0 to 100 degrees C range and +/-0.2 degrees C uniformity and accuracy.
The multiformat block is what makes this the most flexible cycler in the family. One block takes 96 x 0.2 mL tubes or strip tubes, 39 x 0.5 mL tubes, or a single 96-well plate, so a laboratory running mixed formats does not need a second machine or a change of block. Capacity at 96 wells is a full class set in one run.
The temperature specification is the tightest here: uniformity and accuracy both +/-0.2 degrees C, against +/-0.25 on the other units, across a 0 to 100 degrees C control range with a 4 degrees C per second maximum ramp. Control can be set to simulated sample or block, and the heated lid is user adjustable from 30 to 112 degrees C.
The interface is built around a program wizard that guides a user through entering a protocol on a single screen, after which programs are shown graphically and can be edited by touching the step to change. Favourite programs can be given home-screen icons, and storage is unlimited. For a teaching laboratory where a dozen different classes each have their own protocol, named icons and unlimited storage remove the setup error that otherwise dominates.
Time and temperature increments and slower ramp rates can be built into programs, which covers touchdown PCR and long-extension protocols. Power failure restart is included. The unit is 10-1/5 x 14-1/5 x 9-9/10 inches at 16 lb, so it needs a dedicated bench position.
Technical specifications
Specification | As published |
Product type | Thermal cycler, 96-well multiformat block |
Sample capacity | 96 x 0.2 mL tubes or strip tubes, 39 x 0.5 mL tubes, or 1 x 96-well plate |
Block | Multiformat |
Temperature control range | 0 to 100 degrees C |
Temperature uniformity and accuracy | +/-0.2 degrees C / +/-0.2 degrees C |
Maximum ramp rate | 4 degrees C/s |
Temperature control mode | Simulated sample or block |
Lid temperature | 30 to 112 degrees C, user adjustable |
Display | Large full-colour touchscreen with program wizard and favourite-program icons |
Increments and decrements | Time and temperature |
Program storage | Unlimited |
Power failure restart | Yes |
Electrical | 115 V AC, 50/60 Hz |
Dimensions | 10-1/5 x 14-1/5 x 9-9/10 in |
Weight | 16 lb |
Supplied from | Ambala, Haryana, India |
This listing publishes a full specification. Confirm the supply voltage before ordering: the published electrical specification is a 115 to 120 V nominal supply, which is not the Indian mains standard; ask whether a 220 to 240 V, 50 Hz version is available for your destination. The maximum cycle count and hold time per step are not stated. Confirm which block formats are supplied as standard and which are optional.
Range and ordering
This item belongs to the Thermal Cyclers family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.