Digital Dry Bath
Product Code : EL-LWB-11106
Last updated: 6 October 2026
Quick answer: A microprocessor-controlled digital dry bath reaching ambient +5 to 150 degrees C with +/-0.3 degrees C accuracy, a timer to 99 hours 59 minutes or continuous, and data logger software with USB cable. The heating block must be purchased separately.
The temperature ceiling sets this apart: ambient +5 to 150 degrees C, against 100 degrees C on the Mini Dry Bath in this family. That extra 50 degrees covers applications a water bath cannot reach at all, since water boils at 100.
Two features suit unattended work. The timer can be set in 1 minute increments up to 99 hours 59 minutes or run continuously, so an overnight or weekend incubation is programmable rather than needing someone to switch it off. And data logger software with a USB cable is supplied, so the temperature record can be downloaded afterwards, which for any result that depends on the incubation having held is the difference between evidence and assertion.
Control is by microprocessor with easy calibration, set on a dual digital display. The listing makes the practical point that there is no need to check a thermometer and readjust, which is exactly the weakness of the knob-controlled baths in this family. Accuracy is +/-0.3 degrees C with 0.1 degree resolution.
The important purchasing note is that the block must be purchased separately. The unit comes with a block lifter, a lid, the data logger software and the USB cable, but no heating block, so it will not hold a tube as delivered. Specify your tube sizes and order the matching block with the bath, and ask which block formats are available.
Technical specifications
Specification | As published |
Product type | Dry bath incubator, microprocessor controlled |
Temperature range | Ambient +5 to 150 degrees C |
Temperature accuracy | +/-0.3 degrees C |
Temperature resolution | 0.1 degrees C |
Control | Microprocessor, with easy calibration and dual digital display |
Timer | 1 minute increments to 99 h 59 min, or continuous |
Supplied with | Block lifter, lid, data logger software and USB cable |
Not supplied | Heating block; must be purchased separately |
Power requirements | 115 V, 50/60 Hz |
Dimensions | 8-3/10 in W x 12-4/10 in D x 4-7/10 in H |
Weight | 7 lb |
Supplied from | Ambala, Haryana, India |
The heating block is not supplied and must be ordered separately: as delivered the unit cannot hold a tube. Confirm the supply voltage before ordering, since the published rating is 115 V, which is not the Indian mains standard; ask whether a 220 to 240 V, 50 Hz version is available. The available block formats, temperature uniformity as distinct from accuracy, and the operating system the data logger software requires are not stated.
Range and ordering
This item belongs to the Lab Water Baths family within Biotechnology Equipment and Labware, part of the Biotechnology range. Packaged teaching kits are listed under Biotechnology Kits. Bulk, tender and OEM quantities are handled through lab tenders and OEM orders; use the contact page to request a quotation or any specification noted above.